1) Lubrication a) The cutters, counter-cutting rollers, and linoleum should be kept wet, and lubricating oil should be added in time. b) Check the lubricating condition of the chain and add lubricant to the insufficient ones. c) Check whether the main bearing is well lubricated, whether there is high temperature or abnormal sound. d) Use only water and alcohol when scrubbing rubber parts, plastic parts, and paint parts.
2) Safety a) Abnormal noise occurs during production line operation, shut down and adjust in time. b) All belts and timing belts are in normal working condition. c) Adjust the inner and outer cutters properly. d) Regularly inspect the running status of electrical equipment. e) Check the working status of the electric control cabinet, electric control components, motors, solenoid valves, etc. at any time. f) Observe the working conditions of various parts frequently, and stop the machine for overhaul immediately if abnormality is found. g) The whole machine has no failure parts. Non-woven equipment: records are intact, clear, complete, correct and relevant maintenance records are filled on time.